OK maybe not quite back yet

Like it says, maybe I’m not yet back into the writing grind. Still, some life is better than none, eh?

Since that last post, I’ve been mostly working on my ham shack. I now have a laptop set up for use with my radios and the setup works either on the desk in the house or in the vehicle up in the hills. Simple plug and play. Plus I got my radio desk cleaned off, finally!

I designed and built a switchbox that effectively gives me a Tigertronics USB SignaLink with two different radio jumper setups. It’s a simple circuit, just bringing the SignaLink JP1 socket out of the SignaLink enclosure and creating two parallel sockets in the switchbox instead. With a jumper block in each, I can easily switch the SignaLink between the two radios by flipping switches instead of having to open the SignaLink enclosure, swap jumper blocks, reassemble the SignaLink, and switch radio cables. A 15 minute operation is now down to 15 seconds. Nice trade, if I do say so myself.

You can see this switchbox in the picture right under the SignaLink.

The ham shack today. The new switchbox is under the SignaLink between the two radios, above the laptop.

Yup, those of you that are interested, it switches between the Kenwood TS-130V on the right and the Yaesu FT-2500M on the left. Being deaf, my focus is on the digital modes and a friend who is 20 miles away and I plan to play with the digital modes on 2m. So, I expect to be switching back and forth: experimenting, playing, and chatting with my friend on 2m and doing the same on HF with whomever’s out there. The 2m setup will allow us to both get familiar with various digital modes, including CW, and get in some regular practice with them regardless of HF band conditions.

I’ve finally been able to make the test videos for my video project. I have sure learned a lot just making these two 2 and 3 minute videos. Not only post processing, but things that have to be watched out for when filming. Trust me, I’m getting a new respect for directors and filmmakers.

The GoPro has definite fisheye artifacts, as I mentioned previously. I’m still feeling my way in the editing room dealing with this, but I think progress is going well. The Phantom 4 video doesn’t need much editing, as far as colors, etc., but I do need way more practice flying. I discovered that among other things, mimicking a bird taking off isn’t quite as simple as “just push the two control sticks at the same time.” Yeah, there’s that, but you don’t push them the same amount. I also absolutely must fly the planned route ahead of time or I’m going to have very definite un-bird-like behavior.  Even so, everything looks to be saying the video I want to make is doable.

Other than that, I’ve mostly been doing reading, studying Blender, and at least thinking about writing more Pa’adhe stories. Oh, and I have some more mead brewing.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: