Update 10.10.2018

It has been a while since I posted here…once again. I don’t know why that is, but it certainly hasn’t been for lack of anything to post.

Photography-wise, most of my focus lately has been on my old 400mm Tokina. Getting it into sharp focus seems to be an almost impossible task. “Almost” because I refuse to believe it is impossible. For the longest time, I’ve been trying to get “focus trap” to work on the lens with the Pentax K3. No matter what I tried, it just wouldn’t work. It worked with the K10 and *ist, so it was frustrating not being able to use that method.

Then I came across something on the internet that made me search with some terms I would never have thought of using. Sure enough, it turned out that with the K3, Pentax created a setting in the Custom menu to allow or disallow that. Not only that, the name of the menu item, at least to me, isn’t intuitive. Sharp Capture. In hindsight, the name does make some sense. So, now I have the ability to use focus trapping.

Even with that, though, it’s still not locking in with the sharp image I remember. Note to self: put the 400mm on the K10 and/or *ist and verify it works like I seem to remember.

I think ,however, that there is a slight difference where the focal plane is compared to the K10 and *ist bodies. That doesn’t make much sense, but right now it’s the only answer I have. Even with the other manual lenses that I remember working properly on the other two bodies, I have to focus past the subject to get a sharp image.

Right now, my plan is to combine focus trapping with the multiple shot mode. That way, when the focus trapping triggers the rapid sequence of images taken while still adjusting focus manually should hopefully include at least one image in which the image is sharp. Or at least sharpest.

We’ll see.

Well, that idea of focus trapping plus multiple shot mode didn’t work. I guess I’m going to have to try and find another way to do this.

The ham radio arena is the next area to bring up to date. Here, the use of the straight key for Morse code as my computer input keyboard has indeed taught me most of the characters. BUT that only taught me to transmit. Recently, a ham who agreed to be an Elmer (aka Mentor) for me sent me a simple device that activates a LED to the tune of the dits and dahs of Morse code.

I bring that up because once I got this hooked into my radio and everything tuned, I had a chance to actually see some Morse via the LED. I was able to, for the first time, clearly and without any of the usual difficulties of differentiating them, see the Morse code. And that segues nicely into I was able to see the dah-dit-dit but I had absolutely no idea what dah-dit-dit stood for. I actually needed to mentally imagine sending dah-dit-dit with a straight key before I could make the connection to the letter D.

And so I found out what I was afraid of actually happened.

I can now transmit a lot of the characters without even having to think about their dit and dah components. The reverse, however, is not true. I could not decipher that visual representation with the same ease I can send it.

Oh, boy.

Now I’m going to have to add a LED to the straight key I use with the computer. There’s a LED on the Teensy board that flashes as I key the characters but it’s under the board holding the key and not visible. Rats! That would have been a perfect solution.

At least it’s a relatively easy fix and since the onboard LED already flashes while keying, I can use that same pinout, so no code modifications needed. I just have to figure out what color LED to use.

Writing. This is where I hang my head in shame.

I’ve done some editing for other authors, but I’ve done precious little writing of my own. As I mentioned last time, I did start a new Pa’adhe story, but nothing past the opening scene and setting up the tale. I have a reasonably decent story for this one, and it’ll provide the backstory for Scarle, but just sitting down and writing just hasn’t happened. With any luck, writing and posting this will get me going on it.

Unfortunately, I’ve been spending a fair bit of time programming. Unfortunately because otherwise I might have been writing instead.

I bought a cheap 3.5” TFT LCD display that came with NO instructions or paperwork at all. It took me several months to finally locate what seemed to be the same display being sold by another vendor with tutorials and examples. So, that’s now up and running on one of my Arduino Unos.

Plus I’m waiting for a part for a 2004 display (20 chars x 4 lines) so that I can use IIC protocols to program it for use with ham radio. This will be a potential display for viewing and decoding Morse code that comes over the air to my radios. It’s intended to just plug into the headphone jack of the radio and display the detected audio and Morse. Eventually I want to modify that to provide the option of showing, selectively, the following: (1) a bar graph or “LED” display of the dits and dahs, (2) a string of dits and dahs such as …. . .-.. —, or (3) the actual translation of the code to display HELLO. Maybe even other modes, although at the moment those three seem to cover all bases for me.

UGH! That’s enough, this is already longer than planned and there’s more like trips. I’ll save those for another time.

Advertisements

Tags: , , , , , , ,

2 Responses to “Update 10.10.2018”

  1. Linda D. Says:

    Zounds! I’m exhausted just reading that! Hey, how did the vardo come out?

    Like

    • Bill Says:

      Hi Linda!
      The vardo came out pretty nicely after all. I’ll send you a tour link via email. I need to figure out how to get that video into the blog. It didn’t seem to like videos when I first tried, but that may have changed since then.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.


%d bloggers like this: